HANDMADE BRIDGE HUMBUCKER, HB, NEODYMIUM MAGNETS, 4 WIRE, ULTRA DISTORTION MODEL (SHB-UD)

 

Ultra Distortion humbucker model, with neodymium magnets, wound and assembled by hand.

For the bridge position, it's dedicated to those who were not completely satisfied by humbuckers equipped with ceramic magnets or in AlNiCo or were looking for an alternative pickup that will be surely surprising.

Even if it has his musical genres of choice from hard rock to heavy metal, given his four-wire wiring and therefore the ability to play in split mode, it's still very versatile, with both the distorted nd clean sounds.

Like any other neodymium pickup of good quality, it allows you to feel from your guitar nuances and details that models equipped with traditional magnets often do not highlight.

Waxing performed in a paraffin bath mixed with beeswax, which gives the right amount of elasticity necessary for maintaining immunity against unwanted squeal over time.

Pole spacing: 52 mm.

Copper wire: AWG 44

Total series resistance of the coils (connected in series): 19,6 Kohm.

The north coil directs the magnetic south pole towards the strings; opposite orientation for the south coil.

Wiring:

RED: north coil positive;

WHITE: north coil negative;

YELLOW: south coil positive;

BLACK: south coil negative.

FOR SALE ON REVERB.COM: https://reverb.com/item/62068288-handmade-neodymium-magnets-humbucker-4-wire-split-ultra-distortion-model-shb-ud-white-for-bridge

 FIVE STAR FEEDBACK BY A REVERB CUSTOMER:

Handmade Neodymium magnets Humbucker, 4 wire, ULTRA DISTORTION MODEL (SHB-UD) for Bridge position W.

Pat G. – Oct 22nd, 2022

"Really fantastic and well-rounded pickup! Very articulate on the low end, with crisp and clean highs. Perfect midrange. On a clean channel, no note is overpowered by the next, and the coils each have a very distinct sound when isolated. Distortion brings out a chunky sound with a tight control to the lows and screaming highs. Caring and methodical workmanship and great sound. Would buy again and would suggest anyone and everyone give these pickups a chance! Quick international shipper!"

Patrick G. - Katy, TX, USA

Reverb shop: ASAR boutique amplification & pickups

 Demo video on YouTube. The bridge humbucker is the same, SHB-UD, equipped with a closed plastic cover.  https://www.youtube.com/watch?v=HfJSJ42ZvEE&t=402s

                                                           ITALIANO

Humbucker modello Ultra Distortion, con magneti al neodimio, avvolto e assemblato a mano.

Per la posizione ponte, è dedicato a chi non si ritenesse del tutto soddisfatto da humbucker equipaggiati con magneti ceramici oppure in AlNiCo o fosse alla ricerca di un pickup alternativo che si rivelera' senz'altro sorprendente.

Pur spaziando i suoi generi musicali d'elezione dall'hard rock all'heavy metal, dato il suo cablaggio a quattro fili e quindi la possibilità di suonarci in modalità split, è comunque molto versatile, tanto con i suoni distorti che con i puliti.

Come ogni altro pickup al neodimio di buona fattezza, permette di tirare fuori dalla propria chitarra sfumature sonore e dettagli che i modelli equipaggiati con magneti tradizionali spesso non evidenziano.

Ceratura eseguita in bagno di paraffina miscelata a cera d'api, che conferisce la giusta dose di elasticità necessaria al mantenimento nel tempo dell'immunità verso l'innesco di fischi indesiderati.

Spaziatura poli: 52mm

Filo smaltato AWG 44.

Resistenza serie totale delle bobine (connesse in serie): 19,6 Kohm.

La bobina nord rivolge il polo sud magnetico verso le corde; orientamento opposto per la bobina sud.

Cablaggio:

ROSSO: positivo bobina nord;

BIANCO: negativo bobina nord;

GIALLO: positivo bobina sud:

NERO: negativo bobina sud.

IN VENDITA SU REVERB.COM:   https://reverb.com/item/62068288-handmade-neodymium-magnets-humbucker-4-wire-split-ultra-distortion-model-shb-ud-white-for-bridge

Video demo su YouTube. L'humbucker al ponte è lo stesso, cioè l'SHB-UD, dotato di una copertura plastica chiusa  https://www.youtube.com/watch?v=HfJSJ42ZvEE&t=402s

FEEDBACK A CINQUE STELLE RILASCIATO DA UN ACQUIRENTE SU REVERB:

Handmade Neodymium magnets Humbucker, 4 wire, ULTRA DISTORTION MODEL (SHB-UD) for Bridge position W.

Pat G. – Oct 22nd, 2022

"Really fantastic and well-rounded pickup! Very articulate on the low end, with crisp and clean highs. Perfect midrange. On a clean channel, no note is overpowered by the next, and the coils each have a very distinct sound when isolated. Distortion brings out a chunky sound with a tight control to the lows and screaming highs. Caring and methodical workmanship and great sound. Would buy again and would suggest anyone and everyone give these pickups a chance! Quick international shipper!"

Patrick G. - Katy, TX, USA

Negozio di Reverb: ASAR boutique amplification & pickups

MINI P90 MkIII - Handmade Strat sized Neodymium Pickup for Bridge position

 

Handmade pickup for bridge position, suitable for direct replacement of Strat sized pickups, with no need for any adaptation. It is particularly dedicated to those who love the typical tone of the P90 but are not willing to adapt the body of their guitar and / or to accept the aesthetic change.

                                                 TEXT CONTINUE AFTER PICTURES

The bobbin (which has physical characteristics identical to those of the P90, except for his lateral extension) was wound by guiding the wire by hand. Unlike the MINI P90 MkI and HALF DOLLAR models, the MINI P90 MkIIIs are wound using AWG44 wire instead of AWG42.

 

This means that since the wire is thinner (0.050 mm instead of 0.063 mm), a greater number of turns can be wound on the same type of coil used for the MINI P90s. Consequently, thanks also to a powerful neodymium magnetic system, the output level boasted by this pickup is unknown to the vast majority of other existing single coils, including P90 in standard format (especially if equipped with AlNiCo magnets). Output levels aside, compared to the MINI P90 MkI voicing is characterized by a greater emphasis on medium-low frequencies, due to the resonance peak of the coil characterized, in fact, by a greater number of turns.

The Rs of this pickup is 12.6 Kohm (measured at an ambient temperature of 26 ° C).

 

MINI P90 MkIII are also available for the central position (Rs = 11.8 Kohm) and for the neck position (Rs = 11.4 Kohm) and each pickup can also be requested in black or cream. The pickup for the middle position is RWRP compared to the others.

The waxing was carried out in a mixture of paraffin and beeswax (3: 1 w / w), to ensure immunity against any unwanted squeal, maintained over time.

The connection cable is shielded.

The entire MINI P90 MkIII set can also be requested already installed on a pre-wired pickguard.

In sale on Reverb.com : https://reverb.com/item/35561352-mini-p90-mkiii-handmade-strat-sized-neodymium-pickup-for-bridge-position